Cannot Open EML file with Windows Live Mail

How to fix Windows Live Mail Won’t Open Saved .eml Files in Windows.

EML files that are saved form of email received in Windows Live Mail. Many users getting error while opening eml files in their system. They can’t open email after they are saved or windows live mail application open itself, but not showing the saved or opened eml file.

To fix this issue :

  1. Open Run command  (Windows Key + R)
  2. Type regedit and press enter
  3. Goto : HKEY_CLASSES_ROOT and delete “.eml” folder.
  4. Goto : HKEY_CURRENT_USERSOFTWAREMicrosoftWindowsCurrentVersionExplorerFileExts and delete “.eml” folder.
  5. Restart Windows Explorer or PC
  6. Open EML file and choose windows live mail as default. 

Now EML files should be working fine.

Upgrade iBall Slide WQ32 to Windows 10 Home

Microsoft Windows made huge software update in history recently by making millions of PCs upgrading to Windows 10 operating system. While millions of PC were updating day by day, most of us trying to update windows powered tablets like iBall slide WQ32, Dell Venue 8 Pro, and more.

Most difficult part for iBall WQ32 tablet is drive space as it’s a 16 GB SSD, windows took most of the space after installing all updates to Windows.

For x86 windows (32 bit) required only 16 GB of space and x64 requires 20 GB. For iBall WQ32 gets only around 9 GB with windows 8.1 installed leaving 1 to 2 GB of free space in c drive.

Removing recovery drive for space


To delete the drive, you need to unlock or disable BitLocker using PIN, which can be found from Bitlocker settings in windows control panel.

After unlocking the drive, assign a letter to recovery drive using windows virtual disk service.

To access goto, Control Panel > Computer Management > Disk Management. After Assigning letter to the drive, you can easily access the drive in windows explorer and copy install.wim with USB drive to somewhere safe.

Restoring from install.wim file

  • Required Installing tool from Windows Assessment and Deployment Kit
  • Copy install.wim to root of SD card and extracted ADK6x86 to SD card and copy DISM folder contents to where install.wim file is copied then insert into Tablet.
  • Turn on tablet and enter using another windows setup on UEFI bootable usb disk and select Repair your computer then choose Command Prompt
  • Type “Diskpart” at the command prompt, then press Enter
  • Type “listdisk”, then type, “select disk #” (# is disk number), then press Enter
  • Then type “clean”, press enter
  • Then type, “create partition primary”, then press enter
  • Then type “format fs=ntfs quick”, press enter to format
  • Then type “active”, press enter
  • Type “exit”, press enter
  • Go to folder containing install.wim through command prompt
  • Type “imagex.exe /apply install.wim 1 X:/” (X is the drive letter, basically C:), Process will take up to 15 minutes
  • After successful copying, Type cd x86BCDBoot, press enter
  • Type “bcdboot.exe x:windows /s X: /f ALL” (x is windows drive C:)

Ignore any warnings and restart your tablet to get refreshed OEM Windows.


Windows Installation

For Installing Windows 10 requires minimum free space of 5.43 GB on c drive for tablet PCs with 16 GB. In this case iBall WQ32 might have only 2 GB free space, to get more free space on C: drive, you can make backup of install.wim (Recovery Image) file to any where else safe and delete the recovery drive.

Windows allows to use external drive having minimum of 9 GB free space for installing Windows 10 at the time of installation begins.

Updating through windows update, C: drive requires the requested amount of free space, otherwise Windows 10 Upgrade will end in failed after restarting PC.

You can upgrade windows using Media Creation Tool from Microsoft, download and choose Upgrade this PC.

Possible error while installing through Media creation tool is “Something Happened”.

To solve this Issue,

  • Go to windows control panel
  • open Region
  • go to “Administrative” tab
  • click on “Change system locale”
  • select English (United States)
  • click on “Copy Settings”
  • check both check boxes “Welcome screen and system accounts” and “New user accounts”
  • click OK.
  • Restart PC and try again.
iBall WQ32 will start to download (2.02 GB) and starts Upgrading to Windows 10.

After Upgrade you can clear old windows from Disk Clean Up to get more free space, you can make upto 4 GB on windows 10 as windows 10 using 4 GB space on c drive.

After upgrading to windows 10, you will have to install 32-bit Inter HD graphics driver 15.33.38.4252 (10.18.10.4252).

iBall WQ32 Windows Tablet Windows 10 Driver Download

For Windows Tweaks : w7tweaksapp.com

How to fix or remove Locked file Main.lock by Skype

“With Skype, you can share a story, celebrate a birthday, learn a language, hold a meeting, work with colleagues – just about anything you need to do together every day. You can use Skype on whatever works best for you – on your phone or computer or a TV with Skype on it. It is free to start using Skype – to speak, see and instant message other people on Skype for example. You can even try out group video, with the latest version of Skype.

Now Skype has become the part of Microsoft. Together they will bring more innovative technology to friends, family and colleagues everywhere. And now the future possibilities for our customers are even more exciting and more fun.” Skype Team.

Now on internet everyone uses Skype for free calling Skype to Skype with internet enabled mobile phones, TV and other gadgets. Most of them use Skype in Microsoft Windows PC to call around the friends, colleagues, and for other work conferences. In some users experience some sign in trouble at the start up of windows for Skype. They always signed in their systems for easy usage and to save time for the sign in process.

In some cases, the users cannot sign in to their system as usual, when the user enter the log in details, the Skype throw out an exceptional error, like the user already logged in, but the user didn’t logged in actually and cannot use the Skype. This issue can be solved if we could delete the main.lock file that is created by SQLite engine functions of Skype which are created temporarily.

If you open the folder with your Skype user name you will see several SQLite database files and some of them might have companion files associated with the ending –jornal and .lock. For example you may see main.db, main.db-journal and main.lock. All the “-journal” and .lock files are temporary and can be deleted. This file has to be deleted when the user quits Skype, due to some kind of program crash this file doesn’t deletes itself.

Skype main.lock folder screenshot

Solution #1
The main.lock file can be found in C:UserswindowsusernameAppDataRoamingSkypeskypeusernamemain.lock file and file size is 0 bytes. For easy access to the User Application data folder, type %appdata% in windows run menu box or in the windows search box in start menu. Sometimes this file is locked by Skype and it cannot be deleted. If we cannot delete this file we cannot log in to the Skype even we re-install the Skype several times. And for Windows XP C:documents and settingsuserApplication dataSkypeskypeusername folder.
To delete this file, you need quit or end all process of Skype, then try delete main.lock file and other 0 bytes file will clear the issue and user can log in as usual.

In some cases these temporarily created files get locked or its index got corrupted or unreadable for the system. In those case it is required to do disk check and try to remove the file. If still fails to delete the main.lock file the hard disk index is corrupted and need to format to fix.

Solution #2
To fix this severe issue of Skype log in failure, we cannot fix until the disk formatting to remove the main.lock file. So I had found another simple method to recover the Skype files without deleting, rename the Skype folder from the windows Applications data folder to any other name as you like, before renaming the folder you should quit or end all process of Skype, make sure that Skype or its instance are not running, if any instance is running we cannot rename the folder as it is locked by Skype application. After renaming the folder, just run the Skype program to work as usual, and log in with Skype username and password. After that you can copy the history files from the old renamed folder to newly created Skype user name folder, it should work.

Windows 7 Wireless Networking Made Easy

Windows 7 also makes major improvements to how the operating system handles wireless networking. The biggest improvement can be found in the wireless networking pop-up menu itself. If you have Windows 7 installed and your computer has wireless Internet you can open the pop-up menu by clicking on the icon on the left of the taskbar. The icon appears as a series of reception bars, like those found on a cell phone. This Icon shows the Range of these wireless networks that are available to the windows PC user.

Windows Wireless Connections

The new pop-up makes it easy to switch wireless networks. All of the wireless networks available will be displayed on the pop-up. The one that you are currently using will be clearly labeled as “Connected” in bold type. To switch networks, click on that network in the pop-up menu and then click the Connect button. If the network is password protected you will have to type in the encryption key. That’s it! You’re now connected to the new network.


The new wireless networking pop-up menu is so efficient that you’ll rarely have to access anything beyond the functionality it provides, but if you do need to change your wireless networking settings you can do so by clicking Open Network and Sharing Center at the bottom of the pop-up menu.

Next, click on Manage wireless networks on the left of the Network and Sharing Center window.
The Manage Wireless Networks window will show a list of all wireless networks that are 
saved on your computer. These are networks that you will be able to connect to automatically if they are detected by Windows. You can add a new network by clicking the Add button. You will be asked to enter the network’s name, security type, encryption type and security key. Once you have done this you can click Next to save the network to the list. You can also change these settings at any time by right-clicking on a listed network and then clicking Properties from the menu.

W7Tweaks – Grant Admin Full Control

W7Tweaks – Grant Admin Full Control, the application which helps user to take administrator control over file system management in Windows 7 and other some older windows versions which also ensure greater security and reliability of Windows operating systems.

It will grant ownership and full control permissions to TrustedInstaller and has special restricted permissions to all other users, including administrators. The file system management in windows 7 and vista is controlled by Trusted Installer (TrustedInstaller.exe).

It takes all the ownership in the file management, the functions such as enable installation, removal and modification of Windows Updates and optional system components.

Therefore any user even the administrator can’t change the file system. For tweaking the file system or replace or rename you need to take ownership of a file and grant full control permission before make partial or minor changes to those files otherwise it will denied your action.

W7Tweaks – Grant Admin Full Control is the solution for this file permission issues. Grant Admin Full Control is windows software to easily takeover controls on files or folders that have permission issues.

It will add a new option to your Windows Explorer Shell Context Menu when you click on the file or folder that you need to take administrator or user control.

W7Tweaks – Grant Admin Full Control software helps all users to take administrator control over an executable file and any other file formats to make it remove or move if that file’s permission is corrupted and with its simple user interface, users can install this option very easily.


Grant Admin Full Control Requirements:
Dot Net Framework 2.0

Command Line Arguments:
“Grant Access.exe” /m for open as minimized
“Grant Access.exe” /e for Enable Windows Shell Context Menu
“Grant Access.exe” /d for Disable Windows Shell Context Menu

Download latest at W7Tweaks – Grant Admin Full Control
Grant Admin Full Control Download button Softpedia.com  Grant Admin Full Control antivirus scan report at softoxi.com

W7Tweaks – Desktop Shortcuts Cascade Context Menu Editor

The Windows Desktop Cascade Menu Editor is specially designed for editing existing windows cascade context menu that is created by windows users. The old application Windows7 Tweaks – Desktop Menu Customizer have some errors while editing the existing windows cascade or non-cascaded context menu items. The New Desktop Shortcuts application helps the users to easily edit the cascade menu items.


Desktop Shortcut Screenshot
W7Tweaks – Custom Desktop Shortcuts Editor Screenshot

Features of Desktop Shortcuts Cascade Context Menu Editor

The new Desktop Shortcuts Cascade Context Menu Editor have the easy user interface. Simply choose the menu to be Customize or edit and click Open. To customize the settings or edit desktop cascade context menu items click Change button. There user can set the Cascade Name, Icon, Position and Extended Menu. And if the user selected a Cascaded Desktop Menu there will be an option for customize the menu items, simply press the Edit Items button.

In the Edit Items sub-menu the user can Change the Order of items or can remove the cascade menu items. Also can add separator to the windows desktop cascade context menu items. Also can browse to file location with a simple click.


Download Button

Windows 7 Tweaks – Tweaker 1.0

W7Tweaks – Tweaker 1.0 Allows user to Easily Optimize their System Network with a Single Click.


The Options Added for Optimizing Network and Ping latency.



The Main Screen Shows some Basic Tweaks.


In the File Menu View > Network Tweaks shows the Options for Ping and Network Tweaks.


Try out This Beta Version. Submit Your Valuable Comments and Response To me 🙂




Download W7Tweaks – Tweaker 1.0

SnapIt Screen Capture 1Click Software

SnapIt Screen Capture

Capture anything you see on your Windows screen!

Don’t waste time cropping your captures. Take a “snapshot” of anything exactly what you need, with just a click.
Easy to Learn, Easy to Use!
Using SnapIt Screen Capture Software takes just three simple steps:
  1. Start the program (click on the program’s icon). It appears minimized in a system tray: 








2. Click PrtScr (Print Screen) button and select with mouse what you need to capture on the screen. After selecting the region it is automatically copied to the clipboard. [You Can Assign PrtScr, F10, F11 and F12 for Taking Screenshot]

3. Save a snapshot from the clipboard with any way you like:
  • Open Microsoft Word and create new document. Press Ctrl+v combination and paste image from the clipboard to the document. Technical Writers often use this approach to describe program interfaces.
  • Open Photoshop or Microsoft Paint. Create new image file or open existed image file. Simply paste captured image from the clipboard (press Ctrl+V combination). This approach is convenient for Graphic Designers in order to make collages.
  • Right mouse click on the SnapIt icon in a system tray and you will see the menu bellow. Choose “Save As” and save captured image as bmp, png, gif, jpg, etc file.
  











4. Use the Properties menu to define the hot key you want to press to take your screenshots


The most powerful feature of SnapIt:
In menu Properties you may switch on “Auto save images” option. It means that every time you capture image on your PC screen you don’t need to save it! It will be saved automatically in the selected folder with selected image type. It is a very convenient feature for web designers who surf the Internet for new graphic ideas and want to save them in their local collection with one click. 

Top features:
  • Supports hotkeys, auto-saving, clipboard
  • Automatically copies screenshots to the clipboard
  • Saves files in BMPGIFJPEGPNG and TIFF formats
  • Irreplaceable tool for Designers, Office Workers, Business People, Analysts and more
  • Perfect for Technical Writers who have to describe interfaces, menus, buttons, etc.
PCUSERSWORLD:

“The Lightweight SnapIT Screen Capture Software making possible to run in low Configured System at Maximum Performance.”

DOWNLOAD NOW 

W7Tweaks – Simple Drive Hider Pro 1.1

Windows 7 Tweaks – Simple Windows Drive Hider Pro 1.1 offers hiding of Multiple hard drives at once in Windows Operating System. It can be set very easily as it comes as User Friendly.


Simple Windows Drive Hider Pro 1.1 is a lightweight and straight-forward application that enables users to instantly hide any Hard Disk Drive.

W7Tweaks – Simple Windows Drive Hider Pro 1.1 has a simple and comprehensive interface that will quickly guide the user through all its features.


W7Tweaks – Simple Drive Hider Pro 1.1 Main Screenshot

W7Tweaks – Simple Windows Drive Hider Pro 1.1 has the Ability to Hide Windows Drives to Current User or Current Machine.

W7Tweaks – Showing Active Drives

W7Tweaks – Simple Drive Hider Pro 1.1 Active Drives Screenshot


Download from DeviantArts.com

Download from Softpedia.com

W7Tweaks – Windows Auto Shutdown 1.0


Shutdown Windows while system is Idle.

W7Tweaks – Auto Shutdown is a small and easy to use utility that allows you to schedule when your computer should shutdown, hibernate, restart, lock or log off. It can also shutdown system when system is idle.


You can easily choose the triggering action using your System Time or by adjusting Windows idle Time. W7Tweaks – Auto Shutdown has a simple and comprehensive interface that will quickly guide you through all its features.
Free Ram at Single Click !
Click on Ram Text to Free Up Memory Safely.
About – Submit Your Valuable Comments and Bug Reports.

Requirements:


· Net Framework 2.0 Download from Softpedia.com



Download W7Tweaks – Auto Shutdown 1.0 at Softpedia.com

W7Tweaks – Auto Shutdown 1.0 – SOFTPEDIA “100% CLEAN” AWARDThis product was last tested in the Softpedia Labs on 10th of November 2011 by Cosmin Anton
Softpedia guarantees that 
W7Tweaks – Auto Shutdown 1.0 is 100% Clean, which means it does not contain any form of Malware, including but not limited to: Spyware, Viruses, Trojans and Backdoors.